PB 5263 - Horizontal Billet Saw

PB 5263 Horizontal Billet Saw


  • Heavy-Duty
  • Dual Post
  • Horizontal
  • Metal Cutting
  • 20 H.P.
  • 3” Blade

Get More Info


Download Brochure and Spec Sheets

Capacity
52”H x 63”W, 52” Round, 27.5" Min. Clamp Width.
Blade
3” x 42' 7-3/4” x .063"
Blade Tension
Hydraulically controlled tension (40,000 psi) provides consistent square cutting accuracy. The Motion Detector will shut the machine off should a blade break or stall.
Speed Range
50-250 FPM (15-75 m/min.) infinitely variable, driven by heavy-duty worm gear transmission and variable speed pulley.
Hydraulic Down Feed
Feed rate and pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the best setting for the type of material being cut.
Hydraulic Shuttle Table
The 96-1/2" (2450 mm) x 64-1/2" (1636 mm) Heavy Duty Table moves the material into position to be sawed. The table moves at 6 feet per minute and has a travel length of 70-7/8".
Motors
Blade Drive: 20 H.P., Hydraulic Pump: 5 H.P., Coolant Pump: 1/4 H.P.
Blade Guides
A combination of roller bearing and hydraulic actuated carbide blade guides assures the blade is held taut for fast, accurate cuts. The cast iron Movable Guide Arm is positioned through an Electric Motor, than is Hydraulically Locked in position.
Chip Brush
Independently Powered, the chip brush changes speed along with the blade to assure that chips are being removed from each gullet of the blade, improving cutting performance.
Height Selector
To reduce the machine's cycle time, the upward return of the saw frame can be limited through a variable height selector and can be set from 0-52".
Stabilizer bar
To reduce blade vibration upon entry into the work piece, a blade stabilizer bar is provided and aids in producing straighter cuts and helps to extend blade life by reducing blade vibration. Automatic Saw Frame Return and Depth Control are standard.
Cut Indicator Light
The cut line indicator light is positioned on the dovetail above the blade and casts a shadow indicating the true cut line which aids in set-up and assures first cut accuracy.
Full Stroke Vise Jaws
One set of full stroking vise jaws assure that even the largest piece of material will be held securely, while cutting reducing cutting vibration and providing better blade life. A second set of full stroke vise jaws are available as an option.
Out-of-Square Detector
Will shut the machine off automatically should the blade deviate out side the pre-set parameters.
Weight Capacity
The machine's weight capacity is 110,000 lbs. allowing cutting of solids and billets to the machine's maximum capacity.
Floor Space
19' 6" L x 9' 2" W
Other Standard Features
70" Diameter Blade Wheels
Powered Movable Guide Arm w/ Hydraulic Lock
Fixed Position Operator Controls
Automatic Saw Frame Return w/ Depth Control
Automatic Chip Conveyor
Large Single Column w/ Outboard Guide Post
Out-of-Square Protection
Ladder Platform
Anti-Vibration Roller
Coolant Flush Hose
One Parts and Operational Manual
One Saw Blade
Weight of crated Machine
44,000 lbs
Hydraulic Capacity
66 gals
Coolant Capacity
93 gals
Table Height
30.25 in
3 Meter Dead Roller Table
3 Meter Powered Roller Table