PB 3032 Horizontal Billet Saw

  • Heavy-Duty
  • Dual Post
  • Horizontal
  • Metal Cutting
  • 15 H.P.
  • 2-5/8” Blade

Get More Info

Download Brochure and Spec Sheets

30" x 32” Rectangular, 30" Round, 11 1/4” Min. Clamp Width
2 5/8" x 26’ 4” x .063”
Heavy Duty Construction
The saw frame is constructed of 3/4” plate stock with a 12” square tube running across its top to prevent deflection when the blade is put under tension.
Blade Tension
Hydraulically controlled to (40,000 psi) provides consistent square cutting accuracy. The Motion Detector will shut the machine off should the blade break or stall.
Speed Range
95 – 395 SFPM (30/120m/min.) infinitely variable through a frequency inverted system and a heavy-duty Worm Gear Transmission. The broad speed range allows for optimum cutting of a large spectrum of materials. An Electric Tachometer assures accurate speed settings.
Hydraulic Down Feed
Feed rate and pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the best setting for the best setting for the type of material being cut.
Hydraulic Positioning Table
The 34” W x 63” L, The material is place on flat plate table that moves the material to and from the saw. The entire table assembly rides on steel ways and the table has a carrying capacity of 16,550 lbs., as well as a 20" stroke and travels at 10 fpm.
Blade Drive: 15 H.P. (11.25 kW), Hydraulic Pump Motor: 3 H.P. (2.25 kW), Coolant Pump Motor: 1/4 H.P. (.1875 kW)
Blade Guides
A combination of roller bearing and hydraulically actuated carbide blade guides assure the blade is held taut for fast, accurate cuts. The cast iron guide arms are positioned manually.
Chip Brush
Powered from the main drive shaft of the saw, the brush changes speed along with the blade to assure that chips are being removed from each gullet of the blade, improving cutting performance.
Height Selector
To reduce the machine’s cycle time, the upward return of the saw frame can be limited through a variable height selector and can be set from 0-30".
Cut Indicator Light
The cut line indicator light is positioned above the blade and casts a shadow indicating the true line which aids in set-up and assures first cut accuracy.
Dual Vise Jaws
Two sets of vise jaws assures that even the largest piece of material will be held securely. The work piece is held on both sides of the blade, reducing cutting vibration which provides better blade life. Each vise can provide up to 4000 lbs. of clamping force.
Weight Capacity
The machine’s weight capacity is 16,550 lbs. allowing cutting of solids and billets to the machine’s maximum capacity.
Out-of-Square Detector.
Dead Roller Table
6’ has six 3” diameter rollers
Powered Roller Table
6’ has six 3” diameter roller and 1HP drive