Download Brochure and Spec Sheets
28” x 32” Rectangle (711 x 812mm), 28” Round (711mm), 11.2” Min. Clamp Width
2-5/8" x 27’ 4” x .060” (67 x 8300 x 1.6mm)
Heavy Duty Construction
The saw frame is constructed of 3/4” plate stock with a 12” square tube running across its top to prevent deflection when the blade is put under tension.
Hydraulically controlled tension (40,000 psi) provides consistent square cutting accuracy. The Motion Detector will shut the machine off should a blade break or stall.
Blade speeds are infinitely variable through a frequency inverter and heavy duty Worm Gear Transmission. Blade speeds are adjustable form 50-260 SFPM. The broad speed range allows for optimum cutting of a large spectrum of materials.
Hydraulic Shuttle Feed
Length settings of 0 - 20” are made using the EPC Control. The heavy duty cast iron shuttle table travels on two large hardened and chromed cylindrical ways assuring cutoff length accuracy. Repeatability is + .005 per index.
EPC Programmable Control
Conveniently located on the operator’s control panel, this touch screen control allows the operator to program and store up to nine jobs. Inputs include Part Lengths from 0 to 999” (in inches up to 3 decimal places) and Number of Pieces to be cut. The Blade Speed is displayed on and set using the touch screen, but is not stored in memory. The Automatic Piece Counter stops each job when the pre-set number of cuts have been made. The control provides the option of running up to 9 jobs consecutively. The shuttle maximum single stroke is 20”.
Hydraulic Down Feed
Feed rate and pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color coded dial allowing the operator to select the best setting for the type of material being cut.
Blade Drive: 15 H.P. (11.25kW), Hydraulic Pump Motor: 5 H.P. (3.7kW), Coolant Pump Motor: 1/4 H.P. (.1875kW)
Hydraulic controlled solid carbide blade guides are actuated when the machine’s hydraulic system is started to assure the blade is held taut for fast, accurate cuts. The cast iron guide arms are positioned automatically when the machine vise jaw is set in position.
The machine will stop the automatic cycle when a predetermined number of cuts have been reached.
The machine will shut off automatically when material is no longer present in the rear vise jaws, allowing for truly automatic operation.
Powered from the main drive shaft of the saw, the brush changes speed along with the blade to assure that chips are being removed from each gullet of the blade, improving cutting performance.
Work height is automatically set allowing the head to rise just enough to clear the work-piece, reducing cycle time and allowing for faster cutting performance.
Cut Indicator Light
The cut line indicator light is positioned on the dovetail above the blade and casts a shadow indicating the true cut line which aids in set-up and assures first cut accuracy.
Patented Hydraulic, Full Stroke for ease of setup. Available with variable vise pressure for thin wall material. Also provided is an out of stock switch. The rear hydraulic shuttle vise floats to accommodate the cutting of crooked material. Special front vise jaws allow for remnants as small as 2”.
The machine’s weight capacity is 30,000 lbs. allowing cutting of solids and billets to the machine’s maximum capacity.
6' free standing dead roller table
Variable Vise Pressure
Hydraulic clamping pressure to the work holding jaws can be adjusted as required to hold solid or thin wall material, allowing the piece to be held securely and without distortion.