PA260MPC

PA260 MPC Horizontal Post Style Saw


  • Heavy-Duty
  • Double Column
  • High Speed
  • Hydraulic
  • Horizontal
  • Metal Cutting
  • 5 H.P.
  • 1-1/4” Blade
  • Programmable Control

Get More Info


Download Brochure and Spec Sheets

Capacity
12" W x 10.25" H, 10.25" Round. Table Height: 27".
Blade
1-1/4" x 12' 11".
Blade Tension
Hydraulically controlled tension (30,000 psi) provides consistent square cutting accuracy. The motion detector will shut the machine off should the blade break or stall.
Speed Range
65 - 330 SFPM infinitely variable through a frequency inverter drive and heavy-duty worm gear transmission. The broad speed range allows for optimum cutting of a large spectrum of materials. A read out at the operator's touch screen assures accurate speed setting.
Hydraulic Down Feed
Feed rate and down pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the optimum setting for the type of material being cut. Both settings are made at the operator's station.
Hydraulic Shuttle Feed
Length settings of 0 - 16" are accomplished with simple programming at the operator's touch screen. The shuttle comes to positive stops at both ends of the index, assuring cutoff length accuracy, reducing material loss. Repeatability is ± .005 per index.
Motors
Blade Drive: 5 H.P. Inverter Drive, Hydraulic Pump Motor: 1 H.P., Coolant Pump Motor: 1/8 H.P. - All motors are dual voltage, 230/460 Volts, 3 ph., 60 Hz. 208 volt conversion is available for an added charge.
The Operator's Control Panel
Mounted on the left hand side of the machine. It offers full control of all the features of the machine such as; vising, saw frame, Bundle Clamping, Touch Screen, Shuttle Advance & Retract, Coolant, Work Light and more.
MPC Programmable Control
Conveniently located on the operator's control panel, this touch screen control allows the operator to program and store up to 100 jobs. Inputs Include Part Length from 0 to 999" (in inches up to 3 decimal places) and Number of Pieces to be cut. The Automatic Piece Counter stops each job when the pre-set number of cuts have been made. The control provides the option of running up to 20 parts in one job consecutively.
Out-of-Stock Switch
The machine will shut off automatically when material is no longer present in the rear vise jaws, allowing for truly automatic operation.
Blade Guides
The combination roller bearing and carbide blade guides reduce heat and blade stress providing longer blade life and accuracies of ± per inch of cut material.
Fast Approach
Work height is automatically set allowing the head to rise just enough to clear the work piece, reducing cycle time and allowing for faster cutting performance.
Chip Brush
Powered from the main drive shaft of the saw, the brush changes speed along with the blade to assure that chips are being removed from each gullet of the blade, improving cutting performance and blade life.
Work Light
Positioned directly over the work area to provide better illumination of the cutting area, the work light can be turned on and off independently from the operator's control panel.
Vise Jaws
Hydraulic Full Stroking. Front jaws are split to reduce the remnant to as little as 3". The split vise jaws also help to reduce burrs left on the material and are ideal for bundle cutting. Holding the work piece on both sides of the blade reduces blade vibration, providing more accurate cuts and longer blade life.
Automatic Chip Removal
The chip auger rotating in the coolant return removes chips quickly and efficiently, freeing the operator to perform more productive operations. Coolant is allowed to drain back to the tank before the chips are removed from the machine.
Hydraulic Hold-downs
The nesting fixtures for vertical clamping are designed for high-production multiple cutting. Vertically mounted hydraulic clamps located on each vise jaw apply downward pressure to hold multiple bar work or structural shapes.
Variable Vise Pressure
Hydraulic clamping pressure to the work holding jaws can be adjusted as required to hold solid or thin wall material, allowing the piece to be held securely and without distortion.
Free Standing Control Console
Replaces standard control console mounted to machine base with a free standing pedestal and 6’ flexible electrical and hydraulic lines.
First Section Roller Table
Table is constructed from 4” x 5.4 lb. Channel with five 2.5” diameter ball bearing rollers on 12” centers.
Extension Roller Table
Table is constructed from 4” x 5.4 lb. Channel with five 2.5” diameter ball bearing rollers on 12” centers.
Coolant Pan
Fitting roller conveyors, the coolant pan collects and returns coolant back to machine. Included is the pan, V-trough, and hangers