93 ton ironworkers

MSIW93D Ironworkers


  • Heavy-Duty
  • Dual Cylinder
  • Completely Integrated
  • 93 Ton Capacity
  • 10 H.P.
  • 14” Throat
  • 5 Work Stations
  • Simultaneous Dual Operation

Get More Info


 

 

Download Brochure and Spec Sheets

Punching
Punch Pressure
93 tons
Punch Work Table
Includes gauge and adjustable stops.
Adjustable See-Through Punch Stripper
For fast and easy setup.
Die Holder
Adjustable in machined T-slots for quick punch and die alignment.
Standard Tooling
1-1/2" in 3/4"
CPD Series
26 punch, 62 die
Large Tooling
2" in 9/16"
CPD Series
26 punch, 62 die
Large Tooling
2" in 9/16"
CPD Series
SP51P PUNCH, SP80D die.
Optional Oversize Tooling
4-5/16" in 1/4"
Throat Depth
14"
Stroke Length
3-5/32"
Cycles per Minute in 3/4"
25
Punching Station Work Height
42-1/2"
‍ ‍
‍ ‍
Flat Bar Shearing
Flat Bar Shear Capacity
18" in 9/16"
Max. Width x Thickness
14" in 3/4"
Lower Blade
Four usable edges.
Support Table
Includes guides for accurate positioning and indicator lines at 30° and 45° left and right.
Adjustable Hold-Down
Holds work piece securely in position when shearing.
Upper Shear Blade
Provides for minimum distortion. Two usable edges.
Blade Length
19"
Angle Flange Trim
4-3/4"
Flat Bar Shear Work Height
37"
‍ ‍
‍ ‍
Angle Shearing
Maximum Capacity - 90°
6" x 6" x 9/16"
Maximum Capacity - 45°
3" x 3" x 5/16"
Shear Blades
Four usable edges.
Angle Shear Work Height
47-1/4"
‍ ‍
‍ ‍
Bar Shearing
Round Bar Maximum Capacity
2"
Square Bar Maximum Capacity
2" x 2"
Six Cavity Round Bar Shear Size
3/4”, 1-1/8”, 2”
Six Cavity Square Bar Shear Size
1-1/4”, 1, 2”
Channel Shear (optional)
6"
I-Beam Shear (optional)
6"
Bar Shear Work Height
47-1/4"
Notching
Rectangular Notcher
2" x 4" x 1/2"
Gauge Table with Stops
For precise positioning.
Notcher Work Height
37"
Other Standard Equipment
Five sets of Punches and Dies
Punches: 9/16", 11/16", 13/16", 15/16", 1-1/16"; Dies: 19/32", 23/32", 27/32", 31/32", 1-3/32"
CPD Series
26 punch, 62 die
Machine Net Weight
5200 lbs
Machine Dimensions
75" L x 39" W x 74" H
Single Phase Machines
N/A
Magnetic Base Work Light
Adjustable Electric Back Gauge (36")
24 Volt DC Control Voltage
Scrap Boxes at Punching and Notching Stations
Adjustable Stroke Depth at Punch
Two Full-Control Foot Pedals
Two Hole Die Holders
Two Piece Gauging Table at Punch Station
Keyed Punch Holder for Shaped Tooling
Standard Voltage 230/460 Volt, 3 Phase, 60 Hz
Electric Back Gauge
6 ft. (in place of standard 3 ft.)
Channel Web Die Holders (CPD Series 55 Dies)
Used with 3” channel and larger
Channel Shear
3” x 4.1 lb. per foot
4” x 5.4 lb. per foot
5” x 6.7 lb. per foot
6” x 8.2 lb. per foot
208 Volt or 575V requires Buck Boost     
V-Notcher at Notcher Station (4” x4” in 1/2”)
Bending Single V (4” wide V; 10” wide material x 9/16” thick max)
Bending Multi V (3/8”, 7/16”, 5/8”,15/16” wide V’s x 19-1/2” long)
Oversize Punching Kit 1-5/8” to 4-5/16” Diameter Holes
Optional Table for oversize punching 1-5/8” to 4-5/16”