71 ton ironworkers

MSIW71D Ironworkers


  • Heavy-Duty
  • Dual Cylinder
  • Completely Integrated Ironworker
  • 71 Ton Capacity
  • 7-1/2 H.P.
  • 12” Throat
  • 5 Work Stations
  • Simultaneous Dual Operation

Get More Info


 

 

Download Brochure and Spec Sheets

Punching
Punch Pressure
71 tons
Punch Work Table
Includes back gauge and adjustable stops.
Adjustable See-Through Punch Stipper
For fast and easy setup.
Die Holder
Adjustable in machined T-slots for quick punch and die alignment.
Standard Tooling
1-1/2" in 9/16"
CPD Series
26 punch, 62 die.
Large Tooling
2" in 7/16"
CPD Series
SP51P punch, SP80D die.
Optional Oversize Tooling
4-5/16" in 3/16" material
Throat Depth
12"
Stroke Length
2-5/32"
Cycles per Minute in 3/4"
25
Punch Station Work Height
40-9/16"
Flat Bar Shearing
Flat Bar Shear Capacity
14" in 5/8"
Max. Width x Thickness
12" in 3/4"
Lower Blade
Four usable edges
Support Table
Includes guides for accurate positioning and indicator lines at 30 and 45 degrees left and right.
Adjustable Hold-Down
Holds work piece securely in position when shearing.
Upper Shear Blade
Provides for minimum distortion. Two usable edges.
Blade Length
15"
Angle Flange Trim
4"
Flat Bar Shear Work Height
35-1/2"
Angle Shearing
Max. Capacity - 90 Degrees
5" x 5" x 1/2"
Max. Capacity - 45 Degrees
2-1/2" x 2-1/2" x 3/8"
Shear Blades
Four usable edges.
Angle Shear Work Height
44-7/8"
Bar Shearing
Round Bar Max. Capacity
1-3/4"
Square Bar Max. Capacity
1-3/4" x 1-3/4"
Six Cavity Round and Square Bar Shear Sizes
Round: 1/2", 1", 1-3/4"; Square: 3/4", 1-3/4"
Channel Shear Max.
5"
I-Beam Shear Max
5"
Bar Shear Work Height
44-7/8"
Notching
Rectangular Notcher
1-3/4" x 3-9/16" x 3/8"
Gauge Table with Stops
For precise positioning.
Notcher Work Height
35-1/2"
Other Standard Equipment
Five Sets of Punches and Dies
Punches: 9/16", 11/16", 13/16", 15/16", 1-1/16"; Dies: 19/32", 23/32", 27/32", 31/32", 1-3/32"
CPD Series
26 punch, 62 die
Machine Net Weight
3520 lbs.
Machine Dimensions
70" L x 39" W x 74" H
Single Phase Machines
N/A
Magnetic Base Work Light
Adjustable Electric Back Gauge (36")
24 Volt DC Control Voltage
Scrap Boxes at Punching and Notching Stations
Adjustable Stroke Depth at Punch
Two Full-Control Foot Pedals
Two Hole Die Holders
Two Piece Gauging Table at Punch Station
Keyed Punch Holder for Shaped Tooling
Standard Voltage 230/460 Volt, 3 Phase, 60 Hz
3' Electric Back Gauge
Electric Back Gauge
6 ft. (in place of standard 3 ft.)
Channel Web Die Holders (CPD Series 55 Dies)
Used with 3” channel and larger
Channel Shear
3” x 4.1 lb. per foot
4” x 5.4 lb. per foot
208 Volt or 575V requires Buck Boost Transformer
V-Notcher at Notcher Station (4” x4” in 3/8”)
Bending Attach Single V (4” wide V; 10” wide mat’l x 9/16” thick max)
Bending Multi V (3/8”, 7/16”, 5/8”,15/16” wide V’s x 19-1/2” long)
Oversize Punching Kit 1-5/8” to 4-5/16” Diameter Holes
Optional Table  for oversize punching 1.625” to 4.33”