66 ton ironworkers

MSIW66S Ironworkers


  • Heavy-Duty
  • Completely Integrated
  • 66 Ton Capacity
  • 7-1/2 H.P.
  • 8” Throat
  • 5 Work Stations
  • Full Control Foot Pedal

Get More Info


 

 

Download Brochure and Spec Sheets

Punching
Punch Pressure
66 tons
Punch Work Table
Includes back gauge and adjustable stops.
Adjustable See-Through Punch Stripper
For fast and easy setup. With electronic safety interlock.
Die Holder
Adjustable for quick punch and die alignment.
Standard Tooling
1-1/4" x 5/8"
Oversize Tooling
1-1/2" x 3/8"
Throat Depth
9-7/16"
Stroke Length
1-5/32"
Cycles per Minute in 3/4"
22
Punching Station Work Height
41-5/16"
Flat Bar Shearing
Flat Bar Shear Capacity
12" x 9/16"
Lower Blade
Four usable edges.
Support Table
Includes guides for accurate positioning and indicator lines at 30, 45 and 90 degrees left and right.
Upper Shear Blade
Provides for minimum distortion
Blade Length
13-13/16"
Flat Bar Shear Work Height
31-7/8"
Angle Shearing
Max. Capacity - 90 Degrees
4" x 4" x 3/8"
Shear Blades
Four usable edges.
Angle Shear Work Height
45-1/2"
Bar Shearing
Max. Round Bar Capacity
1-1/2"
Max. Square Bar Capacity
1-3/8"
Four Cavity Round and Square Bar Shear Sizes
Round - 1/8", 1 1/2"; Square - 5/8", 1 1/2"
Channel Shear Max
3"
H-Beam Shear Max
3"
Notching
Rectangular Notcher
2" x 3-1/2" x 5/16"
Notcher Work Height
41-3/4"
Cover equipped with electronic safety lock
Gauge table with stops
Other Standard Equipment
Five Sets of Punches and Dies
Punches: 9/16", 11/16", 13/16", 15/16", 1-1/16"; Dies: 19/32", 23/32", 27/32", 31/32", 1-3/32".
CPD Series
20 punch, 55 die.
Machine Shipping Weight
2,900 lbs.
Machine Dimensions
47" L x 36" W 68" H
Magnetic Base Work Light
Scrap Boxes at Punching and Notching Stations
Hydraulic Hold-Downs at Shearing Station
Adjustable Back Gauge-Electric (3')
Adjustable Stroke Depth at Punch Station
Full-Control Foot Pedals
Two Piece Gauging Table at Punch Station
Keyed Punch Holder for Shaped Tooling
Standard Voltage 230/460 Volt, 3 Phase, 60 Hz
Electric Back Gauge
6 ft. (in place of standard 3 ft.)
Channel Web Die Holder (CPD Series 55 Die)
used with 3” channel and larger
Channel Shear
3” x 4.1 lb. per foot
208 Volt or 575 Volt requires Buck Boost
220-1-60 Volt, requires purchase of a phase converter and 60 amp service
V- Notcher, 3-1/2” x 3-1/2” in 5/16”
Bending attachment Single V Max. 4-1/3”” in 5/16”
Angle Bending (2-1/2” x 5/16”)
Large Hole Punch 2.01” to 3.94”
Pipe Notcher Kit