60-ton ironworkers

MSIW60D Ironworkers


  • Heavy-Duty
  • Dual Cylinder
  • Completely Integrated
  • Ironwork with 60 Ton Capacity
  • 7-1/2 H.P.
  • 10” Throat
  • 5 Work Stations
  • Simultaneous Dual Operation

Get More Info


 

 

Download Brochure and Spec Sheets

Punching
Punch Pressure
60 tons
Punch Work Table
Includes back gauge and adjustable stops.
Adjustable See-Through Punch Stripper
For fast and easy setup.
Die Holder
Adjustable in machined T-slots for quick punch and die alignment.
Standard Tooling
1-1/2" in 1/2"
CPD Series
26 punch, 62 die
Large Tooling
2" in 3/8"
CPD Series
SP51P punch, SP80D die.
Optional Oversize Tooling
4" in 3/16" material.
Throat Depth
10"
Stroke Length
2-5/16"
Cycles per Minute in 3/4"
25
Punching Station Work Height
40-9/16"
‍ ‍
Flat Bar Shearing
Flat Bar Shear Capacity
12" in 1/2"
Maximum Width x Thickness
8" in 3/4"
Lower Blade
Four usable edges.
Support Table
Includes guides for accurate positioning and indicator lines at 30 and 45 Degrees left and right.
Adjustable Hold-Down
Holds work piece securely in position when shearing.
Upper Shear Blade
Provides for minimum distortion. Two usable edges.
Blade Length
12-1/2"
Angle Flange Trim
3"
Flat Bar Shear Work Height
35-34"
Angle Shearing
Max. Capacity - 90 Degrees
4" x 4 x 1/2"
Max. Capacity - 45 Degrees
2-1/2" x 2-1/2" x 3/8"
Shear Blades
Four usable edges.
Angle Shear Work Height
44-1/2"
Shearing with no material loss and minimum deformity
Bar Shearing
Round Bar Max. Capacity
1-1/2"
Square Bar Max. Capacity
1-1/2" x 1-1/2"
Six Cavity Round Bar Shear Size
1/2", 1", 1-1/2"
Six Cavity Square Bar Shear Size
3/4", 1-1/2"
Channel Shear Max.
4"
I-Beam Shear Max.
4"
Bar Shear Work Height
44-1/2"
Notching
Rectangular Notcher
1-3/4" x 3-1/2" x 3/8"
Gauge Table with Stops
For precise positioning
Notcher Work Height
35-1/2"
Electrical Interlock Safety Guard
Other Standard Equipment
Five Sets of Punches and Dies
Punches: 9/16", 11/16", 13/16", 15/16", 1-1/16" Dies: 19/32", 23/32", 27/32", 31/32", 1-3/32"
CPD Series
26 punch, 62 die.
Machine Net Weight
3350 lbs
Machine Dimensions
60" L x 39" W x 74" H
Magnetic Base Work Light
Adjustable Electric Back Gauge (36")
24 Volt DC Control Voltage
Scrap Boxes at Punching and Notching Stations
Adjustable Stroke Depth at Punch
Two Full Control Foot Pedals
Two Hold Die Holders
Two Piece Gauging Table at Punch Station
Keyed Punch Holder for Shaped Tooling
Standard Voltage 230 or 460 Volt, 3 phase, 60Hz
Electric Back Gauge
6 ft. (in place of standard 3 ft.)
Channel Web Die Holders (CPD Series 55 Dies)
Used with 3” channel and larger
Oversize Punching Kit
1-5/8"” to 3.94”” Diameter Holes
Channel Shear
3” x 4.1 lb. per foot
4” x 5.4 lb. per foot
Bending Multi V (3/8”, 7/16”, 5/8”,15/16” wide V’s x 19-1/2” long)
Bending Single V (4” wide V; 10” wide material x 1/2” thick max)
V-Notcher at Notcher Station (4” x4” in 3/8”)
Optional Table  for oversize punching 1-5/8” to 3.94”
208 Volt or 575V requires Buck Boost