Vertical Tilt-Frame Saw

2000 Series Manual Vertical Tilt-Frame Band Saw


  • Vertical Tilt-Frame Bandsaw 2125M/2150M
  • Semi-Automatic
  • Heavy-Duty
  • Hydraulic
  • Metal Cutting
  • High-Speed Bandsaw

Get More Info


Download Brochure and Spec Sheets

Capacity: Nominal
20" x 25", 20" Round
Capacity: 45°
20" x 17", 17" Round
Capacity: 60°
20" x 11.25", 11.25" Round
Speed Range
30 to 500 FPM - Infinitely Variable
Feed Force
0 - 300 lbs.
Blade Size - 2125
17'6" x 1.25" x .042 (5334mm x 32mm x 1.07mm)
Blade Size - 2150
18'2" x 1.5" x .05 (5537mm x 41mm x 1.27mm)
Blade Guides
Combination Roller Bearing / Carbide
Blade Tension
45,000 psi. max.
Blade Drive
7.5 H.P., 1800 RPM
Blade Drive - 2150-PC3S
10 H.P. Standard
Coolant Pump
1/8 H.P. (.1 kW)
Hydraulic Pump
5 H.P. (3,7 kW)
Hydraulic Oil
10 gal
Coolant Capacity
60 gal
Table Height - 2125
38"
Table Height - 2150
40"
10-Horse Power Blade Drive
In place of standard 7.5 H.P. drive motor for tough-to-cut applications.
Opposite Hand Work Entry
Right-to-left instead of left-to-right normally furnished.
Manual (Hand Crank) Chip Conveyor
Manually operated hand crank “scraper type” chip conveyor in place of standard chip ramp. Includes one chip box.
Powered Chip Conveyor
Automatic motorized “scraper type” chip conveyor in place of standard chip ramp. Includes drive motor with gear reduction and automatic shut off.
Variable Vise Pressure Control
Enables hydraulic pressure of work holding vises to be adjusted as required. Includes hydraulic pressure gauge and operator control.
DEAD ROLLER (NON-POWERED) ROLLER TABLE SECTIONS
First Section Dead Roller Table, 5’ 0” Long
Three Ball Bearing Idler Rollers, 3.5” diameter, spaced on 20” centers; 3 Flush Plates, and Coolant Pan.
First Section Free Standing Dead Roller Table, 5’ 0” Long
Three Ball Bearing Idler Rollers, 3.5” diameter, spaced on 20” centers.
First Section Dead Roller Table, 10’ 0” Long
Six Ball Bearing Idler Rollers, 3.5” diameter, spaced on 20” centers; 6 Flush Plates, and Coolant Pan.
First Section Free Standing Dead Roller Table, 10’ 0” Long
Six Ball Bearing Idler Rollers, 3.5” diameter, spaced on 20” centers.
First Section Dead Roller Table with Manual Gauge 10’ 0” Long
Six Ball Bearing Idler Rollers, 6 Flush Plates and Coolant Pan; includes Dead Stop, Tilting Type Gauge, manually operated.
First Section Dead Roller Table with Manually Positioned Hydraulic Lift Gauge 10’ 0” Long
Six Ball Bearing Idler Rollers and 6 Flush Plates; includes dead stop, tilting type gauge, manually positioned, hydraulically raised and lowered.
Extension Dead Roller Table 5’ 0” Long
Three Ball Bearing rollers, Coolant Pan, no Flush Plates.
Extension Free Standing Dead Roller Table 5’ 0” Long
Three Ball Bearing rollers; one track stand.
Extension Dead Roller Table, 10’ 0” Long
Six Ball Bearing rollers, Coolant Pan, no Flush Plates.
Extension Free Standing Dead Roller Table, 10’ 0” Long
Six Ball Bearing rollers; two track stands on five foot centers with sway braces.
Extension Dead Roller Table, 5' 0" Long with Gauging
Equipped with gauge rail and measuring tape extensions.
Extension Dead Roller Table, 10' 0" Long with Gauging
Equipped with gauge rail and measuring tape extensions.
Aligning Guide
Vertical Roller Type to align incoming work. Indicate Left or Right and Front or Rear configuration.
Flush Plates
Fill space between work rollers on all Table Sections to prevent shot pieces from falling between rollers. A set to fill all spaces on First Section Tables is included.
LIVE (POWER DRIVEN) ROLLER-TABLE SECTIONS
First Section Live Roller Table 10’ 0” Long
Six powered Ball Bearing rollers, 4.5” diameter, spaced on 20” centers; 6 Flush Plates, and Coolant Pan.
Automatic Power Roller Interface
Provides power to operate in-feed/discharge roller tables.
First Section Live Roller Table with Programmable Hydraulic Gauge 10’ 0” Long
Six powered Ball Bearing rollers, 6 Flush Plates and Coolant Pan; includes programmable hydraulic dead stop, tilting type gauge mounted on rail fastened to either front or rear side of roller table.
Live Roller Table with MANUALLY Positioned Hydraulic Lifting Gauge 10' 0" Long
Six powered Ball Bearing rollers, 6 Flush Plates and Coolant Pan; includes dead stop, tilting type gauge, manually positioned, hydraulically raised and lowered.
Live Roller Table 5’ ’0” Long
Three powered Ball Bearing rollers, 4.5” diameter mounted in cast iron pillow blocks on 20” centers, Coolant Pan, no Flush Plates.
Extension Live Roller Table 10’ 0” Long
Six powered Ball Bearing rollers, 4.5” diameter, mounted in cast iron pillow blocks on 20” centers, Coolant Pan, no Flush Plates.
Extension Live Roller Table 5' 0" Long with Gauging
Equipped with gauge rail.
Extension Live Roller Table 10' 0" Long with Gauging
Equipped with gauge rail.