192 ton ironworker

MSIW192DX Ironworkers


  • Heavy-Duty
  • Dual Cylinder
  • Completely Integrated
  • 192 Ton Capacity
  • 15 H.P.
  • 24-9/16” Throat
  • 5 Work Stations
  • Simultaneous Dual Operation

Get More Info


 

 

Download Brochure and Spec Sheets

Punching
Punch Pressure
192 tons
Punch Work Table
Includes back gauge and adjustable stops.
Adjustable See-Through Punch Stripper
For fast and easy setup.
Die Holder
Adjustable in machined T-slots for quick punch and die alignment.
Standard Tooling
1-1/2" in 1-1/2" material.
CPD Series
26 punch, 62 die
Large Tooling
2" in 1-3/16"
CPD Series
SP51P punch, SP80D die
Optional Oversize Tooling
4-5/16" in 1/2" material.
Throat Depth
24-9/16"
Stroke length
3-1/8"
Cycles per Minute in 3/4"
22
Punching Station Work Height
44-1/2"
Flat Bar Shearing
Flat Bar Shear Capacity
16" in 1"
Maximum Width x Thickness
24" in 3/4"
Support Table
Includes guides for accurate positioning and indicator lines at 30 and 45 Degrees left and right.
Adjustable Hold-Down
Holds work piece securely in position when shearing.
Upper Shear Blade
Provides for minimum distortion. Two usable edges.
Blade Length
24"
Angle Flange Trim
5" in 5/8"
Flat Bar Shear Work Height
37"
Angle Shearing
Max. Capacity - 90 Degrees
8" x 8" x 3/4"
Max. Capacity - 45 Degrees
3" x 3" x 3/8"
Shear Blades
Four usable edges.
Angle Shear Work Height
44-1/2"
Bar Shearing
Round Bar Capacity
2-1/4"
Square Bar Capacity
2" x 2"
Six Cavity Round Bar Shear Sizes
3/4, 1", 1-1/8", 1-1/2", 2"
Six Cavity Square Bar Shear
1", 1-1/2" to 2-1/8"
Channel Shear Max.
10"
I-Beam Shear Max.
10"
Bar Shear Work Height
44-1/2"
Notching
Rectangular Notcher
2-3/8" x 4" x 5/8"
Gauge Table with Stops
For precise positioning.
Notcher Work Height
36-1/2"
Other Standard Equipment
Five Sets of Punches and Dies
Punches: 9/16", 11/16", 13/16", 15/16", 1-1/16"; Dies: 19/32", 23/32", 27/32", 31/32", 1-3/32"
CPD Series
26 punch, 62 die
Two Piece Gauging Table at Punch Station
Table comes with 39" X axis gauge.
Machine Net Weight
13,200 lbs.
Machine Dimensions
93" L x 38" W x 90 H
Magnetic Base Work Light
Adjustable Electrical Back Gauge (39")
24 Volt DC Control Voltage
Scrap Boxes at Punching and Notching Stations
Adjustable Stroke Depth at Punch
Two Full-Control Foot Pedals
Two Hole Die Holder
Keyed Punch Holder for Shaped Tooling
Standard Voltage 230/460 Volt, 3 phase, 60 Hz
Electric Back Gauge
6 ft. (in place of standard 3 ft.)
Channel Shear
3” x 4.1 lb. per foot
4” x 5.4 lb. per foot
5” x 6.7 lb. per foot
6” x 8.2 lb. per foot
V-Notcher at Notcher Station (4” x 4” in 5/8”)
208 or 575 Volt requires Buck Boost
Flat Bar Shear Hydraulic Hold-Down (Special Order w/ machine only)
Bending Attach Single V (4” wide V; 10” wide material x 1” thick max)
Bending Multi V (3/8”,7/16”,5/8”,15/16” wide V’s x 27-1/2” long)
Hydraulic Punch Stripper (Special Order)
Channel Die Holder Used with 3” channel and larger
Optional Table for oversize punching 2-1/4” to 4-5/16”
Oversize Punching Kit 2-1/4” to 4-5/16” Diameter Holes