Marvel TouchTech60
Saws now with
servo driven shuttle. [ click ]
Carbide Tipped Saws
P-65A
P-100A
P-150A
The user friendly control provide quick set up and control through a clear easy to read touch screen. From this screen the operator can change blade speed, trim cut length, set cut lengths, job quantities and set the forward/return limits of the saw blade. Up to 9 different jobs can be stored at one time and can easily be changed or edited.
The saw head is controlled by a hydraulic motor working in conjunction with a precision ball screw. The precise actuate control of the blade provides vibration free cutting, optimum cycle times, and the best part finish possible with a minimal burr. The saw blade transmission has oil bath lubrication while the air-cooled disc brake eliminates vibration and helps minimize gearbox backlash as well as provide prolonged blade life.
The automatic, hydraulically controlled discharge chute assures the trim curs and remnant pieces are separated from good parts.
The automatic loading table allows for fully automatic feeding of the bar stock during the cutting operation. Pieces are automatically lifted one by one onto the shuttle table providing operator free operation.
The automatic feeding system is powered by an AC servo motor and all screw devise. Even if the material is slightly crooked the floating vise assures accurate lengths while the vertical clamp provides for square cutting. At the end of each cut the material is drawn back slightly to allow the blade to return without contacting the material on the way up. Depending on the cut off length, the remnant can be as little as 4-1/4”.
